Vacation – Stretch band!

I’m just back from a couple weeks of vacation with my family. Prior to leaving ,the thought of bringing my bow, briefly crossed my mind, but it really wasn’t practical, and bringing it, would have very likely detracted from the memorable family adventure we ended up having.

I did have some concern about losing ground on the work I’d been putting towards my form though, so I packed a stretch band.

Stretch band in hand 2 (1)

This turned out to be a great solution, It took minimal space, was light and it allowed me time in front of a mirror in the early mornings to practice. I discovered that the mirror/stretch band combo gave me good feedback, and helped me identify posture issues and inconsistencies in my draw.

photo 3

Me, while on holiday, looking a bit serious for the camera.

On the travel end, we didn’t check any bags, and I carried it onboard in my backpack with no issues from the airport security folks, although halfway through the flight I did consider tying up one of my kids with it…

Kiddos aside, the stretch band worked well for me, I found it helpful and an easy peasy solution to a bit of archery in your bag, travelling or otherwise.

C.

 

Advertisements

Tuning cheat sheet

Do you have a hard time remembering tuning rules?

I do.

To help myself out I made a reference card that hangs on my quiver. It is helpful when I can’t remember if tightening the spring on my plunger moves the arrow left or right, or if bareshafts left of the fletched group indicate stiff spine or weak spine, etc.

tuning cheat sheet

I am right handed so the stuff on this sheet is of course for right handed shooters. There are plenty of rules missing, I just jot the rules I can’t easily remember.

Not all the rules are on this sheet just the stuff I sometimes have to scratch my head a bit to remember.  It saves me having to stop what I’m doing, go inside and look it up. It is also helpful at the range where I don’t want to carry a reference book around or to help somebody out who is tuning their rig.

I find having one useful. If you decide to make one up, customize it with the info you need.

C.

 

 

 

 

 

 

Archery and numb fingers

I first experienced numbness and tingling in my fingers while shooting barebow with a thin Damascus glove. The numbness didn’t go away, so after dealing with non-feeling fingers for a while I tried a bit of medical tape around the affected fingers in addition to the glove.

Med tape on fingers

The tape worked but was a chore because I had to apply it every time I picked up a bow. I also had to be precise with how much tape I put on, as varying amounts affected my shots differently. Suffice it to say that it didn’t take me long to make my way back to the land of tabs, and leave the Damascus glove behind.

Cavalier tab

A tab with two layers of leather was certainly better than my thin glove had been but after breaking it in, I found myself experiencing numb fingers again. This time, I did some research on the web and in the varying archery forums. I found that this wasn’t uncommon. I also learned that it wasn’t something to mess with as it could be a sign of amongst other things, tissue damage and or nerve damage. Yikes!

Should this be happening to you, stop. Take a break and give your fingers time to heal, you may also consider checking in with your doc. Nothing to mess with.

While searching the web for answers, the recommendations that made sense, and seemed to be voiced over and over were as follows:

  • Vittorio Frangilli, author of The Heretic Archer, coach, and father of champion archer, Michelle Frangilli, suggests 1mm of leather on your tab for every 10 pounds of weight being pulled.
  •  1 tab layer for every 10 pounds of weight.
  • Deep hook – Using proper deep finger hooking technique will help keep your fingers safe and numb free.
3 layer tab

Top to bottom layers – Cordovan leather, super leather and suede at the bottom.

I was already using a deep hook so I focused on rebuilding the leather layers of my tabs. I knew I wanted strong and smooth cordovan for the face or first layer. I wanted a good solid second layer but I wanted it to be less money than cordovan. Economical but tough Super leather fit that bill, as for the bottom layer or the area which rests against your fingers. I went with the comfortable, and traditionally used, suede.

Finger tab

One of the challenges of adding extra thickness is that the fasteners, for my AAE Elite finger tab, now had less reach. On my first tab which had a used cordovan face, the fasteners fit fine. I had to push while turning to get them to bite, but it worked.

screwdriver countersinking tab fastener holes

Using a number 2 Phillips screwdriver as a rough countersink so the fasteners will seat into the leather.

On my second tab which had newer layers and a whisper more thickness, I couldn’t get all the screws to catch. I happened to have a number 2 Phillips head screwdriver nearby, with it I worked the holes of the suede layer, rotating the screwdriver to and fro with a bit of pressure. This acted as a coarse countersink and allowed the remaining flat head machine screws to seat into the leather and thread into the aluminum face. I used blue Loctite on the threads, as I’ve had the screws work themselves loose in the past, and be lost forever.

P1010699

The next step in the process was to shoot the new tabs in. The additional layer, did in fact do it’s job, and eliminated the tingling and numbness in my fingers. I had also read an interesting comment by John Magera, (archer, olympian, coach and online mentor to many) that the additional thickness of the tab would help to smooth the release. I found this to be true. His exact comment in Archery talk’s FITA/JOAD forum is below:

“Another benefit of adding enough layers to your tab is that it promotes a more relaxed string hand and can lead to a smoother release. When both hands are comfortable and relaxed, you can focus on the tension in your back much easier.”

I had gone up one additional tab layer and replaced a bunch of my old leather with new leather. Now that it was all assembled I was curious as to what the thickness of the tab layers was so I used a simple caliper and measured 5 mm of thickness on my older tab and 5.5 mm of thickness on my newer tab which had all new leather.

My older tab, more broken in tab measured in at 5 mm.

My older tab,  2 new layers and 1  broken in layer, measured in at 5 mm.

My newer tab with newer layers measured in at 5.5 mm's.

My newer tab with all new layers measured in at 5.5 mm’s.

By Frangilli’s guideline (1mm for every 10 lbs) I should be able to pull up to 50 pounds with the 5 mm of leather in place, I achieved 5mm of thickness with 3 tab layers. The other guideline noted was, one tab layer for every 10 pounds, so the same 50 pounds would be 5 tab layers. A difference of two tab layers for the same theoretical weight.

Is somebody wrong? I think not. The thing to remember is that these are guidelines, places to start, both could be correct depending on the quality and thickness of materials used. Think cordovan vs a softer material, like suede.

I would say that every archer has to make the decision of what to use for a schedule of materials based on what they’re pulling for weight, feel, trial and error, money, and whatever else makes it right for them.

As for myself, the numbness is gone and my shot is improved. Life is good!

 

Make a grip

I’ve been on a quest of sorts, to improve my recurve bow grip. I’ve spent time checking out commercial grips, I’ve searched the web and studied pictures of grips, and read what I could find on the subject.

Total Archery - Inside the archer by Kisik Lee,

Total Archery – Inside the archer by Kisik Lee & Tyler Benner

Some of the better information I found was in the book “Total Archery” by Kisik Lee and Tyler Benner. The chapter titled “Grip Positioning” walks you through the theory of gripping the bow and is nicely illustrated with photographs to clarify and support their points. Within that chapter there is a page dedicated to making your own grip, where you can get some straight dope on what to do.

I also found great theoretical info in the World Archery (FITA) Coach’s Manual -Recurve Bow Shooting Form Module. I believe  coach Kim Hyung Tak, wrote this module (see pg 8 of the module).

Grip

In crafting a new grip, there were a few things I wanted to achieve. One I wanted the left edge of the grip to be closer in line with the lifeline on my hand (I’m right handed), providing a wider base so I could feel the bow well supported and not as if my hand wanted to roll around the left side of the grip.

Grip 2

Two, I also wanted a grip that easily let me repeat the same hand placement time after time by providing some hard edges to use as reference. Three, I didn’t know I wanted until I read about it, which was to angle the grip from left to right so it is higher on the lifeline side, placing the pressure point on the right hand side of the grip or put differently, the lateral center of the bow. (see pic below).

Grip 3

Slight angle left to right

This has been and continues to be an evolution, I started with a high grip but found it more difficult to use well so I sanded it down to a medium grip which I prefer. I had a pronounced left to right angle but after using it, I’ve brought it down to a more subtle angle. The face is currently dead flat, time and shooting will decide if this too will evolve.

Fortunately making changes isn’t hard. I’ve been using 3M’s Marine Premium Filler.

3M Marine Premium Filler, easy to sand and shape, dries quickly

3M Marine Premium Filler, easy to sand and shape, dries quickly

What I like about using this filler is it kicks off fast, I can be sanding within a half hour of application. It sands easily, so some 80 grit sandpaper in hand or on a hard block will get you all the shapes you want.

This is a two part product, you mix the filler with a toothpaste like hardener. I mixed it on top of a cardboard square and, then used a couple putty knives to apply it. I applied more than I needed and then sanded down to the shape I wanted. This is stinky stuff, if you use it or a product like it make sure to read all the instructions and warning labels.

At the crux of all this shaping, marine filler, reading, changing and adapting is the marriage between hand and grip. It is creating a shape that meets your hand and solidly directs the force of effort, centrally from hand  to the bow minimizing left, right or other movement of the bow at release. It is really a small technical improvement that helps the greater effort of becoming a better archer.

If you’ve adapted your grip, let me know what you did or what product you used. I’d love to hear it.

C.

 

20 Reasons Archery is the Best Sport EVER – Archery 360

This excellent little article was posted in Archery 360, click on the picture below to go to Archery 360 to check it out.

VEGAS_file041056_3264x4896-X2

Bow and arrow practice video

Got a kick out of this one.. and a flip.

)